DSpace Общество:https://er.knutd.edu.ua/handle/123456789/97512024-03-29T10:45:10Z2024-03-29T10:45:10ZDevelopment of the four-link hinged mechanism of barreling machine driveZalyubovskiy, M. G.Panasyuk, I. V.https://er.knutd.edu.ua/handle/123456789/259592024-03-12T01:00:30Z2023-01-01T00:00:00ZНазвание: Development of the four-link hinged mechanism of barreling machine drive
Авторы: Zalyubovskiy, M. G.; Panasyuk, I. V.2023-01-01T00:00:00ZУдосконалення просторового механізму машини для поверхневої обробки деталей з можливістю регулювання режимів руху робочого масивуКошель, О. С.Панасюк, І. В.https://er.knutd.edu.ua/handle/123456789/259572024-03-12T01:00:30Z2023-01-01T00:00:00ZНазвание: Удосконалення просторового механізму машини для поверхневої обробки деталей з можливістю регулювання режимів руху робочого масиву
Авторы: Кошель, О. С.; Панасюк, І. В.2023-01-01T00:00:00ZОцінка ефективності моделі прогнозування активності користувачів Moodle методами машинного навчанняСтаценко, В. В.Пилипенко, В. І.https://er.knutd.edu.ua/handle/123456789/259532024-03-09T01:00:30Z2023-01-01T00:00:00ZНазвание: Оцінка ефективності моделі прогнозування активності користувачів Moodle методами машинного навчання
Авторы: Стаценко, В. В.; Пилипенко, В. І.2023-01-01T00:00:00ZУдосконалення техніки розрахунку параметрів та управління гібридною фотоелектричною системою з акумулятором для самоспоживання локального об’єктуШавьолкін, О. О.Марченко, Р. М.https://er.knutd.edu.ua/handle/123456789/258222024-02-28T01:00:37Z2023-01-01T00:00:00ZНазвание: Удосконалення техніки розрахунку параметрів та управління гібридною фотоелектричною системою з акумулятором для самоспоживання локального об’єкту
Авторы: Шавьолкін, О. О.; Марченко, Р. М.
Краткий осмотр (реферат): Мета роботи – підвищення ступеня використання енергії гібридної фотоелектричної системи з акумулятором для самоспоживання локального об’єкту з урахуванням відхилень графіка навантаження від розрахункового та генерації енергії від прогнозу при зниженні споживання електроенергії з мережі. Методика – аналітичні методи розрахунку в електричних ланцюгах та результати обробки архівних даних генерації фотоелектричної батареї для заданої точки знаходження об’єкта з використанням комп’ютерного моделювання для оцінювання результатів. Уточнена техніка вибору параметрів фотоелектричної системи за архівними даними генерації за 5 років, що дозволяє підвищити достовірність оцінки очікуваних значень ступеня зниження споживаної електроенергії. Набув розвитку принцип управління із завданням активної потужності за прогнозом генерації фотоелектричної батареї для прийнятого графіка навантаження з корекцією в процесі формування графіка стану заряду акумулятора SoC(t). Це забезпечує можливість компенсації відхилень графіка навантаження від розрахункового та генерації фотоелектричної батареї відносно прогнозного значення до 20% при зниженні споживання електроенергії та підвищенні ступеня використання енергії фотоелектричної батареї. Здійснюється за заданого обмеження глибини розряду акумулятора. Відповідність графіка SoC(t) досягається корекцією споживання активної потужності за відхиленням SoC із заданою дискретністю часу. За цим запропоновано варіант формування графіка SoC(t), що забезпечує можливість корекції за малої генерації фотоелектричної батареї з вирівнюванням споживанням потужності. Отримані рішення щодо формування графіка SoC(t) можуть бути використані при проектуванні фотоелектричних систем для забезпечення власних потреб локальних об’єктів.; Increasing the degree of energy use of a hybrid photovoltaic system with a battery for the local object’s own consumption, taking into account deviations in the load schedule relative to the calculated one and energy generation relative to the forecast value while reducing electricity consumption from the grid. Analytical methods of calculation in electrical circuits and results of processing archival data of photovoltaic battery generation for a given point of location of the object using computer simulation to evaluate the results. The technique for selecting parameters of a photovoltaic system based on archival generation data for 5 years has been improved, making it possible to increase the reliability of estimating the expected values of the degree of reduction in electricity consumption. The control principle with setting the active power based on the forecast of the generation of a photovoltaic battery according to the accepted load schedule with correction in the process of forming a graph of the battery charge level SoC(t) has been developed. This provides the possibility of compensating deviations of the load schedule from the estimated and generation of the photovoltaic battery with respect to the forecast value up to 20% while reducing the electricity consumption and increasing the degree of utilization of the energy of the photovoltaic battery. This is carried out at a given limit on the depth of battery discharge. Compliance of the actual SoC(t) schedule with the given one is achieved by adjusting the active power consumption from the grid according to the SoC deviation with a given time discreteness. A variant of forming the SoC(t) graph is proposed, which provides the possibility of correction during low generation of a photovoltaic battery with leveling the power consumption graph. The obtained decision regarding the formation of the SoC(t) graph can be used in the design of photovoltaic systems for the self-consumption of local objects.2023-01-01T00:00:00ZChirality production during axion inflationGorbar, E. V.Momot, A. I.Rudenok, I. V.Sobol, O. O.Vilchinskii, S. I.Oleinikova, I. V.https://er.knutd.edu.ua/handle/123456789/256972024-02-13T01:00:30Z2023-12-18T00:00:00ZНазвание: Chirality production during axion inflation
Авторы: Gorbar, E. V.; Momot, A. I.; Rudenok, I. V.; Sobol, O. O.; Vilchinskii, S. I.; Oleinikova, I. V.
Краткий осмотр (реферат): We study the generation of a chiral charge during the axion inflation, where the pseudoscalar inflaton field φ couples axially to the electromagnetic field via the term (β/Mp)φ E · B with the dimensionless coupling constant β. To describe the evolution of the electromagnetic field and to determine ⟨E·B⟩ sourcing the chiral asymmetry during the inflation due to the chiral anomaly, we employ the gradient-expansion formalism. It operates with a set of vacuum expectation values of the bilinear electromagnetic functions and allows us to consider the backreaction of generated fields on the inflaton evolution, as well as the Schwinger production of charged fermions. In addition, we assume that the produced fermions thermalize and include the chiral magnetic effect contribution to the electric current given by jCME = e2/(2π2)μ5B, where μ5 is the chiral chemical potential which quantifies the produced chiral asymmetry. Solving a set of equations for the inflaton field, scale factor, quadratic functions of the electromagnetic field, and the chiral charge density (chiral chemical potential), we find that the chirality production is quite efficient leading to the generation of a large chiral chemical potential at the end of the axion inflation.; Ми дослiдили генерацiю хiрального заряду пiд час аксiонної iнфляцiї, де псевдоскалярне поле iнфлатона 𝜑 взаємодiє аксiально з електромагнiтним полем через доданок (𝛽/𝑀𝑝)𝜑 𝐸 · 𝐵 з безрозмiрною константою зв’язку 𝛽. Щоб описати еволюцiю електромагнiтного поля та визначити величину ⟨𝐸 · 𝐵⟩, яка завдяки хiральнiй аномалiї є джерелом хiральної асиметрiї пiд час iнфляцiї, ми використовуємо формалiзм градiєнтного розкладу. Вiн працює з набором вакуумних середнiх вiд бiлiнiйних електромагнiтних функцiй i дозволяє враховувати зворотну реакцiю згенерованих полiв на еволюцiю iнфлатона, а також швiнгерiвське народження заряджених фермiонiв. Крiм того, ми припускаємо, що згенерованi фермiони термалiзуються та внаслiдок хiрального магнiтного ефекту дають внесок до електричного струму, 𝑗CME = 𝑒 2/(2𝜋 2)𝜇5𝐵, де 𝜇5 – хiральний хiмiчний потенцiал, який кiлькiсно визначає створену хiральну асиметрiю. Розв’язуючи систему рiвнянь для поля iнфлатона, масштабного фактора, бiлiнiйних функцiй електромагнiтного поля та хiральної густини заряду (хiрального хiмiчного потенцiалу), ми знаходимо, що генерацiя хiральної асиметрiї є досить ефективною, що вiдображається у великих значеннях хiрального хiмiчного потенцiалу в кiнцi аксiонної iнфляцiї.2023-12-18T00:00:00ZLaser synthesis of nanometric chromium oxide films with high Seebeck coefficient and high thermoelectric figure of merit: an experimental studyStefan, NikolayMulenko, Sergey AnatolevichGorbachuk, Nikolay Tikhonovichhttps://er.knutd.edu.ua/handle/123456789/256782024-02-09T01:00:36Z2022-09-21T00:00:00ZНазвание: Laser synthesis of nanometric chromium oxide films with high Seebeck coefficient and high thermoelectric figure of merit: an experimental study
Авторы: Stefan, Nikolay; Mulenko, Sergey Anatolevich; Gorbachuk, Nikolay Tikhonovich
Краткий осмотр (реферат): The synthesis of nanometric chromium oxide films with variable thickness, stoichiometry, and electrical characteristics was carried out using ultraviolet photons from a KrF- laser (λ = 248 nm). Reactive pulsed laser deposition (RPLD) served as the basis for the synthesis (RPLD). On a <100>Si substrate, film deposition was done between 293 and 800 K. Films placed on a Si substrate have polycrystalline structure, according to XRD measurements. Depending on the substrate temperature, oxygen pressure in the reactor, and film thickness, all films displayed semiconductor temperature behaviour with changeable band gap (Eg) smaller than 1.0 eV. The relationship between film thickness (55-200) nm and oxygen pressure, substrate temperature, and laser pulse frequency was studied. It was found out that the optimum thermo electromotive force coefficient (Seebeck coefficient, S) was high as (3.0-8.0) mV/K and the thermoelectric figure of merit (ZT) was high as 0.23-5.0 in the range of (280-330) K. This made Сr3-XO3-Y nanometric films, which were created using the RPLD process based on UV photons, an incredibly strong contender for efficient thermo-sensors and thermo-converters operating at moderate temperatures. Therefore, the main objective of the investigations submitted in this paper is to establish of conditions for increasing thermoelectric properties of nanometric chromium oxide films.2022-09-21T00:00:00ZСистеми опалення на елементах ПельтьєКолинько, В. М.https://er.knutd.edu.ua/handle/123456789/256542024-02-08T01:00:35Z2023-01-01T00:00:00ZНазвание: Системи опалення на елементах Пельтьє
Авторы: Колинько, В. М.
Краткий осмотр (реферат): Дипломна робота присвячена глибокому аналізу сучасних систем опалення з метою ідентифікації їхніх основних характеристик та переваг. У першому розділі проведено обстеження та порівняльний аналіз різноманітних систем опалення, враховуючи їхні технічні особливості, витрати енергії та екологічний вплив. Другий розділ розглядає застосування ефекту Пельтьє в контексті опалювальних систем. Досліджено технологічні можливості елементів Пельтьє та їхній вплив на підвищення ефективності опалювальних установок. У третьому розділі описано процес розроблення інноваційної системи опалення, в якій використовуються результати аналізу та переваги елементів Пельтьє. Проектування системи включає в себе впровадження новітніх технологій з метою підвищення ефективності та забезпечення стійкості до змін умов експлуатації. Четвертий розділ присвячений експериментальним дослідженням з інтеграції термоелектричної батареї на елементах Пельтьє в газовий котел. Проводяться вимірювання та оцінювання її ефективності за різних умов експлуатації. Отримані дані використовуються для підтвердження та обґрунтування вибраних технічних рішень. Отримані результати вказують на те, що використання ефекту Пельтьє в системах опалення може бути перспективним шляхом для покращення енергоефективності та сталості таких систем. Розроблена опалювальна система може слугувати моделлю для вдосконалення та впровадження нових рішень у сфері сучасних опалювальних технологій.; The thesis is dedicated to a thorough analysis of modern heating systems with the aim of identifying their key characteristics and advantages. The first section includes a survey and comparative analysis of various heating systems, taking into account their technical features, energy consumption, and environmental impact. The second section explores the application of the Peltier effect in the context of heating systems. The technological capabilities of Peltier elements and their impact on increasing the efficiency of heating installations are investigated. The third section describes the process of developing an innovative heating system that incorporates the results of the analysis and the advantages of Peltier elements. The system's design includes the implementation of cutting-edge technologies to enhance efficiency and ensure stability under changing operating conditions. The fourth section is dedicated to experimental research on integrating a thermoelectric battery with Peltier elements into a gas boiler. Measurements and evaluations of its efficiency under various operating conditions are conducted. The obtained data are used to confirm and justify the selected technical solutions. The results indicate that the use of the Peltier effect in heating systems could be a promising approach to improve energy efficiency and stability. The developed heating system can serve as a model for refining and implementing new solutions in the field of modern heating technologies.2023-01-01T00:00:00ZВикористання бойлеру в системі електроживлення для забезпечення власних потреб приватної оселі з гібридною фотоелектричною системоюШавьолкін, О. О.Підгайний, М. О.https://er.knutd.edu.ua/handle/123456789/256162024-02-02T01:00:34Z2023-01-01T00:00:00ZНазвание: Використання бойлеру в системі електроживлення для забезпечення власних потреб приватної оселі з гібридною фотоелектричною системою
Авторы: Шавьолкін, О. О.; Підгайний, М. О.
Краткий осмотр (реферат): Мета роботи – підвищення ефективності гібридної фотоелектричної системи з акумулятором для потреб приватної оселі шляхом регулювання потужності електричного бойлеру для максимального використання енергії фотоелектричної батареї на споживання, розвиток принципів реалізації системи управління енергоспоживанням. Методика – планування енергоспоживання приватної оселі. Аналіз енергетичних процесів в системі забезпечення теплою водою та в електричних колах фотоелектричної системи живлення з використанням комп’ютерного моделювання для оцінювання ефективності енергоменеджменту. Розроблено структуру регулятору потужності бойлеру з забезпеченням близького до синусоїди струму, що споживається, для всього діапазону регулювання. Математична модель бойлеру в системі забезпечення оселі теплою водою. Структура фотоелектричної системи з введенням блоку формування ступеню заряду акумулятору та регулятору потужності бойлеру. Запропоновано формування графіку ступеню заряду акумуляторної батареї з регулюванням потужності, що споживається бойлером, за відхиленням від заданого графіку. Це сприятиме більш повному використанню енергії фотоелектричної батареї та зменшенню споживання електроенергії з мережі. Обґрунтовано можливість використання сценаріїв енергоспоживання з плануванням життєдіяльності родини протягом доби без суттєвих обмежень. Удосконалено модель бойлеру в добовому циклі функціонування з графіком споживання теплої води. Розвинуто структуру моделі енергетичних процесів в системі електроживлення оселі для добового циклу функціонування з введенням моделі бойлеру, що враховує його температурний режим. Отримані рішення є основою для проектування фотоелектричних систем для забезпечення потреб приватних осель.; Increasing the efficiency of a hybrid photovoltaic system with a storage battery for the residential house needs by regulating the power of the electric boiler to maximize the use of photovoltaic battery energy for self-consumption, developing the principles of implementing an energy management system. Planning the residential house energy consumption. Analysis of energy processes in the warm water supply system and in the electrical circuits of the photovoltaic power system using computer modeling to assess the effectiveness of energy management. The structure of a boiler power regulator has been developed to ensure a current consumption close to a sinusoid for the entire adjustment range. Mathematical model of a boiler in a system for providing a house with warm water. Photovoltaic system structure with the introduction of a unit for forming the state of the storage battery charge and a boiler power regulator. Proposed to form the graph of storage battery state of charge with regulation of the power consumed by the boiler according to deviation from the specified graph. This will contribute to more complete utilization of the photovoltaic battery energy and decrease the consumption of electricity from the grid. The possibility of using energy consumption scenarios with planning family life activities during the day without significant restrictions is substantiated. The boiler model has been improved in the daily operating cycle with a warm water consumption schedule. The structure of the model of energy processes in the power supply system of a house for the daily cycle of operation has been developed with the boiler model introduction that takes into account its temperature regime. The obtained solutions are the basis for the design of photovoltaic systems to provide the needs of residential homes.2023-01-01T00:00:00ZImproving the autonomous lighting system and equipping pedestrian crossingsDzikevych, Anna V.Ivanova, Margaryta S.Oleinikova, I. V.https://er.knutd.edu.ua/handle/123456789/255662024-01-31T01:00:34Z2023-03-01T00:00:00ZНазвание: Improving the autonomous lighting system and equipping pedestrian crossings
Авторы: Dzikevych, Anna V.; Ivanova, Margaryta S.; Oleinikova, I. V.
Краткий осмотр (реферат): The aim of this study is to improve the developed autonomous energy-efficient lighting system for a pedestrian crossing. The implementation of new elements and solutions based on the latest research and materials has been justified. Increasing efficiency and functional capabilities is relevant for the energy crisis situation in Ukraine. The methodology of this work involves the use of a new ecological material to increase the wear resistance of the light-emitting coating. The modernization of the solar panel design to improve energy supply efficiency. The introduction of a structural element – a charging module – to expand the functionality of the lighting system. Due to significant damage to Ukraine's energy infrastructure, pedestrians have found themselves in a high-risk accident zone, and the proposed modernization is largely aimed at creating safe conditions for them. The creation of a three-component mixture for the road surface and painting will allow obtaining durable and reliable road marking. The mixture consists of paint, luminescent material, and "basalt scaly." The 3D model of this lighting system has been improved with changes in the design of solar panels and the addition of charging elements. The conclusion justifies the expediency of the changes made.2023-03-01T00:00:00ZNatural materials in the eco-design of the urban environmentHoperskyi, Serhii V.Oleinikova, I. V.Lagoda, Oksanahttps://er.knutd.edu.ua/handle/123456789/255652024-01-31T01:00:26Z2023-03-01T00:00:00ZНазвание: Natural materials in the eco-design of the urban environment
Авторы: Hoperskyi, Serhii V.; Oleinikova, I. V.; Lagoda, Oksana
Краткий осмотр (реферат): Factors affecting the choice of materials for the creation, operation and disposal of objects and infrastructure systems of the city are considered. Basalt and carbon fiber composites were selected as materials that meet the requirements of ecodesign. The unique properties of these materials provide a wide range of products that can be made on the basis of such natural fibers. The main areas of improvement of the specified materials, improvement of properties to expand their functionality are considered. A comprehensive approach to the design of objects is proposed, taking into account all possible dangers that arise from the initial stage of their production to the last stage - disposal. The possibility of using basalt composites as components of most objects in the creation of a natural human habitat has been demonstrated. The high absorption properties of carbon fabrics have been studied. This allows creating a new approach to the issue of water and air purification.2023-03-01T00:00:00Z