Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: https://er.knutd.edu.ua/handle/123456789/16323
Название: Програмні модулі комп’ютерної програми реалізації алгоритму рекурсії для випадку змінного вхідного натягу
Другие названия: Software module of computer program implementation of recursion algorithm for case of variable input tension
Авторы: Щербань, В. Ю.
Петко, А. К.
Колиско, О. З.
Щербань, Ю. Ю.
Шолудько, М. І.
Ключевые слова: комп’ютерна програма
алгоритм рекурсії
програмні модулі
нитка
вхідний натяг
гармонічна функція зміни натягу
транслятор
computer program
recursion algorithm
program modules
thread
input tension
harmonic tension change function
translator
Дата публикации: 2020
Библиографическое описание: Програмні модулі комп’ютерної програми реалізації алгоритму рекурсії для випадку змінного вхідного натягу / В. Ю. Щербань, А. К. Петко, О. З. Колиско, Ю. Ю. Щербань, М. І. Шолудько // Вісник Хмельницького національного університету. Серія : Технічні науки. – 2020. – № 2 (283). – С. 213-218.
Source: Вісник Хмельницького національного університету. Серія : Технічні науки
Herald of Khmelnytskyi national university. Technical sciences
Краткий осмотр (реферат): В роботі наведена структура комп’ютерної програми реалізації алгоритму рекурсії для визначення технологічних зусиль для випадку, коли вхідний натяг має змінне значення. Представлені програмні модулі програми для визначення технологічних зусиль на текстильних машинах у випадку, коли змотування нитки відбувається з бобіни з урахуванням зміни її діаметру для широкого спектру ниток та пряжі. Програмними модулями передбачена можливість завдання закону зміни натягу у вигляді гармонічної функції або довільної функції користувача з використанням зворотних польських записів у вигляді транслятора. В комп’ютерній програмі закладена можливість зміни швидкості руху нитки, довжини лінії пружної системи заправки, перетину нитки, її вхідного натягу, матеріалу направляючих поверхонь, їх форми. В якості структурних елементів можливо використовувати направляючі великої та малої кривизни, пристрої для натягу нитки та компенсатори натягу. Наведено опис основних процедур та функцій.
The paper describes the structure of a computer program for the implementation of the recursion algorithm to determine the technological effort in the case where the input tension is variable. The program modules of the program are presented for determination of technological efforts on textile machines in the case when the winding of the yarn comes from the bobbin taking into account the change of its diameter for a wide range of yarns and yarns. The software modules provide the possibility to set the law of change of tension in the form of a harmonic function or an arbitrary function of the user using reverse Polish entries in the form of a translator. The computer program provides the ability to change the speed of the filament, the length of the line of the elastic filling system, the intersection of the filament, its input tension, the material of the guide surfaces, their shape. As structural elements, it is possible to use high and low curvature guides, thread tensioners and tension compensators. The basic procedures and functions are described. The main parameter of optimization of the filing system on the technological equipment of the textile and knitwear industry is the minimum required tension in the working area. Increasing the tension in the work area causes the yarn to break and, as a consequence, to stop the process equipment. Downtime-related downtime equals 75-80% of total downtime. This has a negative impact on the performance of the equipment, reducing the quality of products. Reducing the tension to the minimum required also adversely affects the normal course of the process. This is due to the violation of the technological conditions of interaction of the thread with the working bodies in the area of formation of fabric or knitted fabric. The thread tension increases when passing through the filling zones of the filing system on the process equipment. This increase is due to the interaction of the thread with the guides and tensioning devices. The maximum tension value will be in front of the work area. A characteristic feature is the change in the input tension when winding the thread from the reel. Determining the law of change of tension at the entrance to the filing system of the process equipment will allow to determine the tension in the working area taking into account the real winding conditions. The development of special computer programs to determine the tension in the work area allows you to quickly determine the necessary technological parameters, make adjustments, both the structure and components of the filament system to obtain the minimum required tension in the work area.
URI (Унифицированный идентификатор ресурса): https://er.knutd.edu.ua/handle/123456789/16323
Faculty: Факультет мехатроніки та комп'ютерних технологій
Department: Кафедра комп'ютерних наук
ISSN: 2307-5732
Располагается в коллекциях:Наукові публікації (статті)
Кафедра комп'ютерних наук (КН)

Файлы этого ресурса:
Файл Описание РазмерФормат 
Щербань_VKNU-TS-2020-N2_(283)-1.pdf1,03 MBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.