Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://er.knutd.edu.ua/handle/123456789/17873
Назва: Modeling of the elastic plates of non-base configurations for the cams of automatic half-hose machines
Автори: Berezin, Leonid
Savchenko, Kyrylo
Rubanka, Mykola
Polishchuk, O. S.
Oliinyk, Olena
Rubanka, Alla
Ключові слова: elastic plate of the cam
strength
flexibility
Finite Element Method
Code_Aster
Дата публікації: 1-лют-2021
Бібліографічний опис: Modeling of the elastic plates of non-base configurations for the cams of automatic half-hose machines / L. Berezin, K. Savchenko, M. Rubanka, O. S. Polishchuk, O. Oliinyk, A. Rubanka // Advances in Science and Technology Research Journal (ASTRJ). – 2021. – Volume 15, Issue 1. – P. 92-98.
Source: Advances in Science and Technology Research Journal (ASTRJ)
Короткий огляд (реферат): The purpose of the work was analytical research and computer modeling of the influence of shape and size of console beams of elastic plates in non-base configurations for the cam of the automatic half-hose machine under the conditions of flexibility, strength, and minimization of sizes. The scientific novelty of the work lies in the further development of the theory and methodology of designing the elements of knitting systems of the automatic half-hose machines based on regimes of loading, limitations in strength and dimensions, as well as requirements of the technological process. In order to increase the flexibility of the elastic plate, the symmetrical introduction of two console beams of trapezoidal shape was proposed. The influence exerted by the coefficient of the shape of console beams and their lengths on the magnitudes of deflections and stresses was analyzed, which allows making grounded and flexible decisions regarding the dimensions of the root and the end sections of the beams at the preliminary stage of design. The mathematical support was presented mainly in an explicit form, which simplified the analysis of the influence of controlled dimensions of the elastic plates on their flexibility and strength, as well as contributes to the comprehensive approach to the development of cams of different constructions with elastic plates and allows improving the quality and efficiency of design solutions of cams. The beam bending theory and the finite element method based on Code_Aster shared software were used. The model of the plate was represented by an ordered grid of finite nodal elements of the same size, without the use of elongated and flat elements. According to the results of simulation experiments, the distributions of deformations and stresses on the surface of the elastic plate of the cam were obtained, depending on its shape and size, which confirmed the validity of calculated recommendations.
DOI: 10.12913/22998624/130826
URI (Уніфікований ідентифікатор ресурсу): https://er.knutd.edu.ua/handle/123456789/17873
Faculty: Факультет дизайну
Факультет мехатроніки та комп'ютерних технологій
Department: Кафедра ергономіки і дизайну
Кафедра прикладної механіки та машин
ISSN: 2299-8624
Розташовується у зібраннях:Наукові публікації (статті)
Кафедра моди та стилю (МС)
Кафедра механічної інженерії (МІ)

Файли цього матеріалу:
Файл Опис РозмірФормат 
P092-098.pdf2,06 MBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.