Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: https://er.knutd.edu.ua/handle/123456789/13328
Название: Дослідження тиску еластичного основов'язаного трикотажу
Другие названия: Investigation of pressure of elastic warp knitted fabric
Авторы: Кизимчук, О. П.
Мельник, Л. М.
Богунова, О. А.
Ключевые слова: еластичне полотно
тиск на тіло
основов’язання
утокове переплетення
параметри структури
подовження
еlastic fabric
pressure garment
warp knitting
filling-in structure
structural parameters
elongation
Дата публикации: 2019
Библиографическое описание: Кизимчук О. П. Дослідження тиску еластичного основов'язаного трикотажу / О. П. Кизимчук, Л. М. Мельник, О. А. Богунова // Вісник Хмельницького національного університету. – 2019. – № 2 (271). – С. 85-90.
Source: Вісник Хмельницького національного університету
Herald of Khmelnytskyi national university
Краткий осмотр (реферат): Мета роботи полягає у дослідженні тиску, який створює еластичний основов'язаний трикотаж на тіло людини та встановлення його залежності від параметрів в’язання та умов експлуатації виробу. В результаті реалізації двофакторного експерименту виявлено, що найбільший вплив на параметри структури має лінійна густина поперечної утокової нитки, а показник тиску полотна на тіло людини залежить від попереднього видовження еластомерної нитки, а також від видовження полотна та діаметру кривизни поверхні охоплення. Отримані в результаті дослідження рівняння регресії, які адекватно описують залежність параметрів структури полотна від кількості ниток у поперечному утку та попереднього видовження еластомерної нитки, дозволяють на етапі проектування полотна прогнозувати їхні властивості з урахуванням рівня тику, який буде створювати трикотаж на тіло при різних умовах експлуатації виробу.
The purpose of the work is to study the pressure of an elastic wart knitted fabric on the human body and to establish its dependence on the knitting parameters and the conditions of the product operation. An elastic warp knitted fabric is the subject of the study. The 15 gauge crochet knitting machine was used for its production. The 16.7 tex polyester yarn are used for ground interlooping "chain". The polyurethane thread of 0,8 mm diameter is laid longwise in each wale. The 33.4 tex polyester thread by 2, 3 or 4 ends are used as weft filling-in yarn to ensure the covering of polyurethane. The study of structural parameters of the elastic warp knitted fabric was conducted by standard methods according to the current scientific and technical documentation. MST pressure measuring device by SWISSLASTIC AG is used for the investigation of product pressure on the human body respectively to RAL-GZ 387/1. The experimental data was processing by mathematical statistics methods. The two-factor experiment has been planned and carried-out during this study. The linear density of the weft filling-in thread and the pre-elongation of warp filling-in elastomeric threads were chosen as input factors. As a result of the experiment, it was found that the linear density of the weft filling-in thread has the greatest influence on the structural parameters and pre-elongation of warp filling-in elastomeric threads has an influence on the value of the fabric pressure on the human body. Additional two-factor experiment has been planned and carried-out to study dependences the fabric pressure on both: the fabric extension and the curvature diameter of the coverage surface. The regression equations that adequately describe the dependences of the structural parameters on the number of threads in the weft filling-in yarn and on the pre-elongation of the elastomeric thread have been established during the study. They allow to predict fabric properties at the design stage, taking into account the pressure level on the body and different conditions of the product operating.
URI (Унифицированный идентификатор ресурса): https://er.knutd.edu.ua/handle/123456789/13328
Faculty: Факультет індустрії моди
Department: Кафедра технології та дизайну текстильних матеріалів
ISSN: 2307-5732
Располагается в коллекциях:Наукові публікації (статті)
Кафедра технології моди (ТМ)

Файлы этого ресурса:
Файл Описание РазмерФормат 
VHNU_2019_2(271)_Р085-090.pdf535,95 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.